How to build a workbench – (Part 1) Laminating the top – with Paul Sellers

Category : For the DIY'er
How to build a workbench – (Part 1) Laminating the top – with Paul Sellersby wpjljron.How to build a workbench – (Part 1) Laminating the top – with Paul SellersHow do you build a workbench without a workbench? This is a somewhat difficult part of getting into woodworking that Paul Sellers addresses in this video. In…

How do you build a workbench without a workbench? This is a somewhat difficult part of getting into woodworking that Paul Sellers addresses in this video. In…

Author: 

Related Posts

25 Responses

  1. Δημήτρης29 January, 2014 at 7:51 pm

    Are those kilned wood?
    I have a factory near by that cuts wood from spruce trees and sold them
    without drying time, they use them for making the rooftops in houses.
    Is a bad idea to build with not kilned dry wood?

  2. UreaSmith15 January, 2014 at 9:46 am

    NO dog holes or vices..Any videos showing how he uses that bench

  3. Kfir Lavi4 January, 2014 at 11:55 pm

    You should get the politzer prize.

    Thanks,
    Kfir

  4. Toni Borisov30 December, 2013 at 6:12 pm

    What glue you use?

  5. palmer397727 December, 2013 at 4:27 pm

    my god

  6. Mehrcat710 December, 2013 at 12:58 am

    Good video! I was taught, when laminating, always to join a heartwood face
    to a heartwood face, and end grain pattern ideally forming “S” shapes.

  7. Qupia S8 December, 2013 at 10:28 am

    Love all your videos you’re always a good teacher on every method you show
    which is so helpful for people like me who are trying to learn.
    Side note for viewers…
    I like how people who are looking at videos on how to make a work bench are
    telling a professional of 40+ years he’s doing it wrong. Seriously
    /eyeroll!

  8. mfcman2k730 October, 2013 at 1:07 am

    would it be possible Paul to produce a video on how to make them
    traditional saw horses

  9. Honey Hole Hive27 October, 2013 at 9:07 pm

    To me its a waste of a lot of lumber and very heavy, my dad made one think
    got like 24 2×4 out of it and used them for a wall frame

  10. Tanner saslow13 October, 2013 at 1:54 am

    you where not helping by sitting on it (in the beginning). great video
    though ^.^

  11. alan3018912 September, 2013 at 5:12 am

    Good catch. One more clamp, ooo I mean four more. 🙂

  12. Lee Marrett24 July, 2013 at 11:14 pm

    Paul, I’m just trying to consolidate a final bill of materials for this
    project and I’m seeing some differences between your videos and books and
    what you list as the dimensions. I’m a subscriber on your masterclass site
    and I started a forum thread here:
    woodworkingmasterclasses(dot)com/discussions/topic/paul-sellers-workbench/#post-15245
    My last comment shares my very slight frustration, could you perhaps shed
    some light?

  13. blachfordm19 April, 2013 at 1:04 pm

    Related question: do they have Home Depot in the UK?

  14. Jan Szymon Gołowacz3 March, 2013 at 8:23 am

    You can look for some carpentery in the neighborhood. Smal garage workshop
    or manufacture is no important. Important is planer machenie. Some times
    sawmill have a planer, some times people from sawmill know place where you
    can plane wood. I know, hand tools work is great, but is no simply without
    experience make big project.

  15. Nelson Baietti1 March, 2013 at 1:56 pm

    that’s a mess on the ground that seems really hard to clean later, and
    also, if it winds or rains… oh boy…

  16. sergio ALESSANDRINI17 February, 2013 at 10:34 pm

    prima di fare un tavolo era meglio costruirsi un mazzuolo

  17. William Davis6 February, 2013 at 7:00 pm

    Harbor Freight and rockler carry them much cheaper.

  18. 1too3fore30 January, 2013 at 11:22 pm

    Paul, can you use recycle wood used for stud walls from old homes, assuming
    one pulled out all the nails? Will planing this wood cause too many issues
    for the blade? Have you tried this approach for any of your workbenches?
    Thanks!

  19. Ricardo Rodrigues Pena17 December, 2012 at 5:16 pm

    Dear Sir, Good afternoon from Brazil. I’m crazy for projects in wood, but I
    have no tools and much less money to buy them. Enroll me in all channels
    for research projects but I see that the tools to run them are expensive
    and difficult to access. If someone, for some reason, stopped working with
    wood and want to donate their tools, please let me know.

  20. Paul Sellers5 December, 2012 at 5:31 am

    These are made in China clamps and are sold under various distributor
    names. If you google aluminum clamps or alluminium clamps you will find
    them. The ones I have are called Sigma.

  21. CostaExtranjero18 November, 2012 at 10:06 pm

    Nice work there! Someone can also use two pieces of wood and a smaller
    clamp on each edge to flush the pieces. Place one piece of wood on top and
    the other on the bottom and place vertically the small clamp to grab both.

  22. 1too3fore13 November, 2012 at 3:45 pm

    Would be nice to show the completed workbench at the very start of the
    video.

  23. Donny Kooy10 November, 2012 at 9:55 pm

    You have inspired me to build my own woodworking bench…can I laminate
    4x4s together for the top, or would u advise against that

  24. Dark Doink31 August, 2012 at 8:16 pm

    Where’s your rubber mallet? Ha ha.

  25. 0116me16 August, 2012 at 7:53 pm

    they have electric planers nowadays if you didnt know

Leave a Reply