6-How to Build a Shed Door – How to Build a Generator Enclosure

Category : For the DIY'er
6-How to Build a Shed Door – How to Build a Generator Enclosureby wpjljron.6-How to Build a Shed Door – How to Build a Generator EnclosureThis video takes you through all the steps to build a shed door. This door design is the same for all of our sheds found on icreatables.com http://www.icreat…

This video takes you through all the steps to build a shed door. This door design is the same for all of our sheds found on icreatables.com http://www.icreat…

Author: 

Related Posts

4 Responses

  1. Kwane Martin4 December, 2013 at 2:27 am

    what size wood are you using for the trim and planks?

  2. Chuck Smith23 August, 2013 at 2:50 pm

    Normally I would use hap lap joints on the courners which will give the
    door more support and straight.

  3. Jerry Sprat9 August, 2013 at 4:06 pm

    Suggestion: to get the inch-and-a-half overhang without all the measuring
    and jockeying, just use short pieces of 2×4 lumber on each side

  4. exo teric19 May, 2013 at 11:03 pm

    thanks for a great “how-to” tutorial video

Leave a Reply