How to build a shower base with concrete

Category : For the DIY'er
How to build a shower base with concreteby wpjljron.How to build a shower base with concreteHaving a beautiful shower is the dream of many of us, to be able to fell relaxed and regenerated after each time we use it is one of the most inspiring feeli…

Having a beautiful shower is the dream of many of us, to be able to fell relaxed and regenerated after each time we use it is one of the most inspiring feeli…


Related Posts

14 Responses

  1. Rick Fountain24 May, 2014 at 8:18 am

    DUDE…This is a disaster waiting to happen. FIRST…DO NOT make the bench
    part of the step. When water hits your bench where will it go? The bench
    should be FULLY INSIDE the hop up. I also agree with the NO PRESLOPE
    question? That is against code. If the water gets to the LINER what are the
    potential other disasters you could run into, especially if the liner has a
    hole in it? Not to mention you’re on PLYWOOD. I would have never EVER built
    a shower like this. I wonder how it looks today? Could you please show us a
    video of how the drain looked when finished?

  2. Greg wilkin23 May, 2014 at 2:46 am

    Sal and Hugo, you both left out 2×8 blocking along the shower base.

  3. Tino51355 May, 2014 at 11:12 am

    Question? dont u have to put concrete underneath the Liner? then concrete
    on top the liner? your way is much faster, no fucking around!!

  4. Antonio anom5 May, 2014 at 4:35 am

    Hugo your video is very descriptive and thanks for share, now my question
    is… Under the shower liner is suppose to be a cement base with the
    incline to the drain?

    please let me know,

    Thanks again!

  5. DJFNS75 May, 2014 at 2:48 am

    thanks for the video

  6. brk49er4 May, 2014 at 4:23 am

    wouldn’t it be better to run the pan all the way across build the mud bed
    and then build your bench out of concrete blocks instead of out of wood.

  7. GetBoards24 April, 2014 at 4:29 am

    Where do i get that sand mix special blend? Can i buy it already premixed?
    Thank you

  8. jim schweiker15 April, 2014 at 9:34 pm

    Where is the pre-slope under the liner? 

  9. TileMasterGa22 March, 2014 at 3:40 am

    I see that you have water-lines and VALVE running on exterior wall, and
    wall is 2×4. This is against building code and never should be performed,
    even with extra insulation ! !

    You should build 2×6 wall in order to do that my friend – how could you
    accept this MAJOR error and let it go? very not professional.

  10. RestoreITdontJunkIT17 February, 2014 at 9:42 pm

    good info.

  11. Sal DiBlasi1 February, 2014 at 3:57 am

    Seems to me that you are well intentioned, but you omitted a few critical
    steps while installing your liner and mud.

  12. 12341walkman31 January, 2014 at 11:58 pm

    Love your video’s Hugo, I can’t wait to see more of how you finish up on
    this bathroom. God bless you and yours….

  13. Wayne Meador31 January, 2014 at 6:15 pm

    So do you use a concrete board on the walls and bring it down the the
    concrete shower base and seal that joint somehow? Good video +Hugo Correa!

  14. Hugo Correa31 January, 2014 at 5:56 pm

Leave a Reply